Welcome to the Handmade Dress Up Series! Like what you see? Please PIN it or Stumble it! Thanks!
Hello! I had another guest planned for today but as you know, our families are more importand than blogging so I’m stepping in for her today with a repost of some quick and easy wings I made for my daughter a few years ago. I’ve since used this method to make butterfly wings as well. So, if you have a little one that just MUST be a ladybug or a butterfly (bat?) this afternoon, go ahead and try this method!
My daughter changed her mind about her Halloween costume 3 days before Halloween. I searched for ladybug costume ideas and came up with a few cute examples. I couldn’t find anything that was quick and easy and used what I had around the house so I invented my own. This method could be used for any type of dress up wings and took less than an hour to make. Most of the materials were repurposed.
What you will need:
1 old red t-shirt (or red knit, felt or fleece fabric)
1 small piece of black fabric (or old t-shirt or sweater)
28″ of elastic (I used 1/2″ width)
Old cereal box
Heavy stabilizer, or something equivalent.
Wonder under or similar for applique
Making the wings
Trace the shape of the wings onto the cereal box. Cut out one wing then use that as a template to trace the other wing so they are exactly the same shape. My wings were basically a semi-circle with a bit of a change up at the bottom. You could use a plain semi-circle and be just fine though.
Then use your cardboard as a template for your fabric. Using a pen (a fabric pen is preferred but it really doesn’t matter) trace the shape of your wings onto your fabric. I used a men’s XL t-shirt and had plenty of fabric. I put the template’s straight edge on the fold so I only had to make one cut for each wing.
Trace 8 small circles onto your wonder under. I used a kids’ cup as my template. Iron the wonder under onto your black fabric. Cut out the circles and iron them on your red wing fabric. Note: The first time I did this I was not paying enough attention and put the dots on the front of one of the wings and the back of the other. Oops. Pay attention.
Sew around the edge of the circles with a zigzag stitch. I recommend using a tear away stabilizer on the back of the fabric if you are using knits to prevent puckering. If you don’t have a stabilizer any old scrap of fabric will work. Just cut out a piece a bit larger than your circle and put it on the underside of the fabric.
Next, fold the wing fabric, wrong sides together and put the cardboard sandwiched in between. I sewed the wings up around the edges, sewing on my marked line) and then trimmed the fabric.
Next cut 2 rectangular pieces of the red fabric and 2 pieces of the heavy stabilizer. In a pinch, lightweight cardboard could work instead of the stabilizer. It won’t be as flexible but it will keep the wings from sagging. In reality, no kid would know the difference.
Put the stabilizer in between the red fabric and sew around the edges. Trim the edges close to the seam.
Now lay the wings down, dot side down and place this connector piece in between them where you want. Position the elastic and then sew it all together. This is how I placed mine.
Check out the other Handmade Dress Up tutorials!