My ladybug

IMG_2236

My daughter changed her mind about her Halloween costume 3 days before Halloween. I searched for ladybug costume ideas and came up with a few cute examples. I couldn't find anything that was quick and easy and used what I had around the house so I invented my own. This method could be used for any type of dress up wings and took less than an hour to make. Most of the materials were repurposed.

What you will need:

1 old red t-shirt (or red knit, felt or fleece fabric)

1 small piece of black fabric (or old t-shirt or sweater)

28" of elastic (I used 1/2" width)

Old cereal box

Heavy stabilizer, or something equivalent.

Wonder under or similar for applique

Making the wings

Trace the shape of the wings onto the cereal box. Cut out one wing then use that as a template to trace the other wing so they are exactly the same shape. My wings were basically a semi-circle with a bit of a change up at the bottom. You could use a plain semi-circle and be just fine though.

IMG_2201 

Then use your cardboard as a template for your fabric. Using a pen (a fabric pen is preferred but it really doesn't matter) trace the shape of your wings onto your fabric. I used a men's XL t-shirt and had plenty of fabric. I put the template's straight edge on the fold so I only had to make one cut for each wing.

IMG_2202
DO NOT CUT ALONG YOUR MARKED LINE! Cut at least a half an inch around your marked line. You will be sewing directly on that line you drew.

Trace 8 small circles onto your wonder under. I used a kids' cup as my template. Iron the wonder under onto your black fabric. Cut out the circles and iron them on your red wing fabric. Note: The first time I did this I was not paying enough attention and put the dots on the front of one of the wings and the back of the other. Oops. Pay attention.

Sew around the edge of the circles with a zigzag stitch. I recommend using a tear away stabilizer on the back of the fabric if you are using knits to prevent puckering. If you don't have a stabilizer any old scrap of fabric will work. Just cut out a piece a bit larger than your circle and put it on the underside of the fabric. 

Next, fold the wing fabric, wrong sides together and put the cardboard sandwiched in between. I sewed the wings up around the edges, sewing on my marked line) and then trimmed the fabric.

IMG_2211
Next cut 2 rectangular pieces of the red fabric and 2 pieces of the heavy stabilizer. In a pinch, lightweight cardboard could work instead of the stabilizer. It won't be as flexible but it will keep the wings from sagging. In reality, no kid would know the difference.

Put the stabilizer in between the red fabric and sew around the edges. Trim the edges close to the seam.

IMG_2213
Nex
t cut the elastic into two 14" pieces. I made a casing for my elastic but that isn't necessary. 

Now lay the wings down, dot side down and place this connector piece in between them where you want. Position the elastic and then sew it all together. This is how I placed mine.

IMG_2234
That's it! You're done. Now you have ladybug wings!

IMG_2238

IMG_2240

Comments

  1. Briana says

    This is a great site! Thank you for sharing! :) I am making my daughter a Ladybug Girl costume for Halloween this year, and was wondering some things about the wings you made here. They look fantastic! When you stitched the wings onto the stabilizer/connector piece, did you hand stitch them? The lines of stitch almost look like they were done with a machine, but I am not sure how. Have you ever sewn through paperboard or corrugated cardboard with a machine? And… you mentioned a more recent costume you made used felt for the wing fabric. Did you have any problems sewing felt on your machine, or do you think using fabric glue to attach the felt to the paperboard would work? Thanks so much for your tutorial… just trying to figure out the details. :)

  2. Andrea @ The Train To Crazy says

    Yes, this is all machine stitched! I cut the cardboard a bit smaller so I didn't sew it much but your machine will sew through a thinner cardboard. If you have a thicker cardboard just cut the cardboard a bit smaller so it doesn't get sewn.
    YES! You can definitely sew felt in your machine!